Product
Stainless Welding Wire - RW ER307
Stainless filler wire for joining high-strength unalloyed/alloyed steels and dissimilar combinations. Suitable for wear/cavitation-resistant fillet welds on components like turbines and valves.
Product code
RW ER307
Product
Stainless Welding Wire - RW ER307
Used to join high-strength unalloyed and alloyed steels, armor steels, 14% Mn steels, ferritic chromium steels, heat-resistant steels, and aged steels. Also used for fillet welds resistant to fracture, wear and cavitation (turbines, valves).
Classıfıcatıon
TS EN ISO 14343-A
G 18 8 MN
AWS
AWS A5.9
ER 307
Shıeldıng gas
Tip: Use a stable argon-rich shielding gas and follow your WPS for heat input and dilution control on dissimilar joints.
Applıcatıons
Specifications & application fields
RW ER307 is used to join high-strength unalloyed and alloyed steels, armor steels, 14% Mn steels, ferritic chromium steels, heat-resistant steels, and aged steels. It is also used for fillet welds that need resistance to fracture, wear, and cavitation—such as turbines and valves.
Dissimilar steels
Reliable joining
High Mn / armor
Tough deposits
Valves & turbines
Wear / cavitation
Processes: TIG (Ar) and MIG (Ar+2.5% O₂ / Ar+2.5% CO₂).
Notes
Recommended use
Control dilution
Keep heat input consistent for dissimilar joints and buffer layers.
Stable shielding
Argon for TIG; Ar + 2.5% O₂ or Ar + 2.5% CO₂ for MIG.
Hard service parts
Suitable for fillet welds requiring wear/cavitation resistance.
Final suitability depends on WPS, joint design and base metal.
Chemıstry
Chemical properties
Typical wire composition.
| Analysıs type | C | Si | Mn | Cr | Ni |
|---|---|---|---|---|---|
| Welding wire | 0,034 | 0,77 | 6,36 | 18,16 | 8,18 |
Mechanıcs
Mechanical properties
After welding / ISO-V impact (−40°C).
| Test type | Shıeldıng gas (MIG/TIG) | Yıeld strength (MPa) | Tensıle strength (MPa) | Elongatıon (%) | Notch ımpact ISO-V (−40°C) |
|---|---|---|---|---|---|
| After welding | M12–M13–M14–I1 | Min 400 | Min 580 | Min 30 | Min 63 J |
Packagıng
Packaging options
Diameters and net weights per piece.
| Dıameter (mm) | Packagıng type | Net weıght (kg) |
|---|---|---|
| 1,00 | Metal spool | 15 |
| 1,20 | Metal spool | 15 |
| 1,60 | Plastic box | 5 |